Jalan jalan dari taliwang ke sumbawa naik motor, wah memang asyik, hehe. ya taliwang dan sumbawa adalah nama daerah di pulau sumbawa, buat yang seneng naik motor , jalan jalan di sini perlu di coba, daerahnya masih alami, lokasi jalan raya juga melewati pantai, bukit, perkebunan, sawah, peternakan , wah lengkap pokoknya, yang lebih asik lagi buat anda para bikers, tikungan jalan dan tanjakan yang dilalui, wah mantap.
Archive for Juni, 2010
Taliwang – sumbawa
Minggu, Juni 27th, 2010Update windows xp
Kemis, Juni 17th, 2010Pernahkah anda waktu mengupdate windows putus di tengah jalan, dan saat mencoba di update kembali selalu gagal / error, bila iya, coba anda lakukan ini
START >> RUN >> CMD terus klik OK
Setelah muncul dos tuliskan CHKDSK /f
Tekan Enter
Pada option Y/N Pilih Y
Tekan Enter
Restart Komputer anda
saat start up komputer anda akan melakukan scan file, biarkan proses scan selesai
bila sudah coba anda update kembali win anda
NB, Pengalaman Pribadi
Sejarah gprs
Slasa, Juni 8th, 2010GPRS (singkatan bahasa Inggris: General Packet Radio Service, GPRS) adalah suatu teknologi yang memungkinkan pengiriman dan penerimaan data lebih cepat dibandingkan dengan penggunaan teknologi Circuit Switch Data atau CSD. Penggabungan layanan telepon seluler dengan GPRS (General Packet Radio Service) menghasilkan generasi baru yang disebut 2.5G. Sistem GPRS dapat digunakan untuk transfer data (dalam bentuk paket data) yang berkaitan dengan e-mail, data gambar (MMS), Wireless Application Protocol (WAP), dan World Wide Web (WWW).
1. Sejarah
Kemunculan GPRS didahului dengan penemuan telepon genggam generasi 1G dan 2G yang kemudian mencetuskan ide akan penemuan GPRS. Penemuan GPRS terus berkembang hingga kemunculan generasi 3G, 3,5G, dan 4G. Perkembangan teknologi komunikasi ini disebabkan oleh keinginan untuk selalu memperbaiki kinerja, kemampuan dan efisiensi dari teknologi generasi sebelumnya. 1. Generasi 1G: analog, kecepatan rendah (low-speed), cukup untuk suara. Contoh: NMT (Nordic Mobile Telephone) dan AMPS (Analog Mobile Phone System). 2. Generasi 2G: digital, kecepatan rendah – menengah. Contoh: GSM dan CDMA2000 1xRTT. 2G merupakan jaringan telekomunikasi seluler yang diluncurkan secara komersial pada GSM di Finlandia oleh Radiolinja pada tahum 1991.
Time Division Multiple Access (TDMA): membagi frekuensi radio berdasarkan satuan waktu. Teknologi ini memungkinkan untuk melayani beberapa panggilan secara sekaligus melakukan pengulangan-pengulangan dalam irisan waktu tertentu yang terdapat dalam satu channel radio.
Personal Digital Cellular: Cara kerja mirip dengan TDMA, PDC lebih banyak digunakan di negara Jepang.
iDEN: teknologi berbasis CDMA dengan arsitektur GSM memungkinkan untuk membuka aplikasi Private Mobile Radio dan Push to Talk.
Digital European Cordless Telephone: teknologi ini berbasis TDMA digunakan untuk keperluan bisnis dalam skala menengah ke atas.
Personal Handphone Secvice: teknologi ini tidak jauh berbeda dengan DECT, kecepatan transmisinya jauh lebih cepat dan digunakan dalam lingkungan yang lebih luas.
IS-CDMA: Teknologi ini meningkatkan kapasitas sesi penelponan dengan menggunakan metode pengkodean yang unik untuk setiap kanal frekuensi yang digunakan.
GSM: teknologi GSM menggunakan sistem TDMA dengan alokasi kurang lebih delapan di dalam satu channel frekuensi sebesar 200kHz per satuan waktu. Kelebihan dari GSM ini adalah interface yang tinggi bagi para provider dan penggunanya.
3. Generasi 3G : digital, kecepatan tinggi (high-speed), untuk pita lebar (broadband). Contoh: W-CDMA (atau dikenal juga dengan UMTS) dan CDMA2000 1xEV-DO.
4. Generasi 3,5G: memungkinkan akses internet yang lebih cepat. Contoh: HSDPA.
5. Generasi 4G : merupakan Long Term Evolution (LTE) yakni, evolusi dari teknologi 3GPP dan Ultra Mobile Broadband (UMB) berasal dari 3GPP2, sehingga sulit untuk dibedakan dengan jelas antara teknologi 3G dan 4 G. Contoh: Wimax Mobile Standard.
Sekilas
GPRS merupakan sistem transmisi berbasis paket untuk GSM yang menggunakan prinsip ‘tunnelling’. Ia menawarkan laju data yang lebih tinggi. Laju datanya secara kasar sampai 160 kbps dibandingkan dengan 9,6 kbps yang dapat disediakan oleh rangkaian tersakelar GSM. Kanal-kanal radio ganda dapat dialokasikan bagi seorang pengguna dan kanal yang sama dapat pula digunakan dengan berbagi antar pengguna sehingga menjadi sangat efisien. Dari segi biaya, harga mengacu pada volume penggunaan. Penggunanya ditarik biaya dalam kaitannya dengan banyaknya byte yang dikirim atau diterima, tanpa memperdulikan panggilan, dengan demikian dimungkinkan GPRS akan menjadi lebih cenderung dipilih oleh pelanggan untuk mengaksesnya daripada layanan-layanan IP.
GPRS merupakan teknologi baru yang memungkinkan para operator jaringan komunikasi bergerak menawarkan layanan data dengan laju bit yang lebih tinggi dengan tarif rendah ,sehingga membuat layanan data menjadi menarik bagi pasar massal. Para operator jaringan komunikasi bergerak di luar negeri kini melihat GPRS sebagai kunci untuk mengembangkan pasar komunikasi bergerak menjadi pesaing baru di lahan yang pernah menjadi milik jaringan kabel, yakni layanan internet. Kondisi ini dimungkinkan karena ledakan penggunaan internet melalui jaringan kabel (telepon) dapat pula dilakukan melalui jaringan bergerak. Layanan bergerak yang kini sukses di pasar adalah, laporan cuaca, pemesanan makanan, berita olah raga sampai ke berita-berita penting harian. Dari perkembangan tersebut, dapat dirasakan dampaknya pada kemunculan berbeagai provider HP yang bersaing menawarkan tarif GPRS yang semakin terjangkau.
Dalam teorinya GPRS menjanjikan kecepatan mulai dari 56 kbps sampai 115 kbps, sehingga memungkinkan akses internet, pengiriman data multimedia ke komputer, [[notebook]] dan [[handheld computer]]. Namun, dalam implementasinya, hal tersebut sangat tergantung faktor-faktor sebagai berikut:
Konfigurasi dan alokasi time slot pada level BTS
Software yang dipergunakan
Dukungan fitur dan aplikasi ponsel yang digunakan
Ini menjelaskan mengapa pada saat-saat tertentu dan di lokasi tertentu akses GPRS terasa lambat, bahkan lebih lambat dari akses CSD yang memiliki kecepatan 9,6 kbps.
Perbedaan GPRS dan WAP
WAP merupakan kependekan dari Wireless Application Protocol adalah teknologi seperti WWW dan merupakan protokol untuk mengakses internet melalui HP, sedangkan GPRS (General Packet Radio Service). adalah teknologi koneksi yang digunakan oleh HP tersebut menuju jalur internet. Misalnya, kita menggunakan broadband pada PC yang terkoneksi ke Speedy.
Komponen Utama
Komponen-komponen utama jaringan GPRS adalah:
GGSN (Gateway GPRS Support Node): gerbang penghubung jaringan GPRS ke jaringan internet. Fungsi dari komponen ini adalah sebagai interface ke PDN (Public Data Network), information routing, network screening, user screening, address mapping.
SGSN (Serving GPRS Support Node): gerbang penghubung jaringan BSS/BTS ke jaringan GPRS. Komponen ini berfungsi untuk mengantarkan paket data ke MS, update pelanggan ke HLR, registrasi pelanggan baru.
PCU : komponen di level BSS yang menghubungkan terminal ke jaringan GPRS
Cara Kerja
SGSN bertugas: 1. Mengirim paket ke Mobile Station (MS) dalam satu area 2. Mengirim sejumlah pertanyaan ke HLR untuk memperoleh profile data pelanggan GPRS (management mobility) 3. Mendeteksi MS-GPRS yang baru dalam suatu area servis yang menjadi tanggung jawabnya (location management) 4. SGSN dihubungkan ke BSS pada GSM dengan koneksi frame relay melalui PCU (Packet Control Unit) di dalam BSC.
GGSN bertugas: 1. Sebagai interface ke jaringan IP external seperti : public internet atau mobile service provider 2. Memutakhirkan informasi routing dari PDU ( Protokol Data Units ) ke SGSN.
GPRS menggunakan sistem komunikasi packet switch sebagai cara untuk mentransmisikan datanya. Packet switch adalah sebuah sistem di mana data yang akan ditransmisikan dibagi menjadi bagian-bagian kecil (paket) lalu ditransmisikan dan diubah kembali menjadi data semula. Sistem ini dapat mentransmisikan ribuan bahkan jutaan paket per detik. Transmisi dilakukan melalui PLMN (Public Land Mobile Network) dengan menggunakan IP seperti 08063464xxx. Karena memungkinkan untuk pemakaian kanal transmisi secara bersamaan oleh pengguna lain maka biaya akses GPRS, secara teori, lebih murah daripada biaya akses CSD. GPRS didesain untuk menyediakan layanan transfer packet data pada jaringan GSM dengan kecepatan yang lebih baik dari GSM. Kecepatan yang lebih baik ini didapat dengan menggunakan coding scheme (CS) yang berbeda dari GSM.
Cara Pemasangan
Untuk dapat menggunakan GPRS (khususnya pada handphone yang mendukung) diperlukan setting terlebih dahulu. Cara setting GPRS terdapat di masing-masing operator. Setting GPRS di HP dapat dilakukan dengan otomatis dan manual. Setting GPRS secara otomatis dapat dilakukan dengan mengirimkan SMS ke provider yang anda miliki, tarifnya bervariasi antar provider, dan format pesan yang dikirimkan juga berbeda-beda tergantung dari setiap provider. Sementara, untuk setting GPRS secara manual HP cukup mengikuti petunjuk setting default yang terdapat di HP, tanpa perlu mengubah-ubahnya lagi. Jika ingin memakai HP untuk koneksi Internet dari PC, anda hanya perlu untuk mengeset GPRS saja, tanpa perlu mengeset WAP ataupun MMS. Tiga hal yang harus diketahui adalah access point name, username, dan password. Selanjutnya, untuk menggunakan GPRS di komputer, dapat menyambungkan handphone yang telah tersetting GPRS itu dengan komputer yang telah tersetting. Cukup memasukkan angka dialling misalnya 08096470 dan klik tombol dial, maka permintaan kita akan segara disambungkan. Saat ini, GPRS di Indonesia kalah bersaing dengan teknologi 2,75G, 3G, 3,5G, dan 4G yang memang pengembangan lebih lanjut dari GPRS.
Pengembangan Gprs
Generasi 2,75G
Generasi 2,75G dikenal dengan generasi EDGE. EDGE diperkenalkan oleh AT&T di Amerika Serikat pada tahun 2003. Secara teknis sebetulnya EDGE telah memenuhi standar 3G yang ditetapkan oleh ITU. Teknologi ini dapat mengirimkan data lebih cepat dari 2.5G.
Generasi 3G
Teknologi 3G terbagi menjadi GSM dan CDMA. Teknologi 3G sering disebut dengan mobile broadband karena keunggulannya sebagai modem untuk internet yang dapat dibawa ke mana saja. Perkembangan teknologi 3G secara komersial dimulai pada Oktober, 2001, ketika NTTDoCoMo dari Jepang dengan teknologi W-CDMA menjual produknya untuk pertama kali secara terbatas. Kemudian disusul oleh SK Telecom, Korea Selatan pada tahun 2002 dengan teknologi 1xEV-DO, diikuti oleh KTF dari Korea Selatan dengan teknologi EV-DO. Keberhasilan layanan 3 G di kedua negara ini disebabkan oleh faktor dukungan pemerintah. Pemerintah Jepang tidak mengenakan biaya di muka (upfront fee) atas penggunaan lisensi spektrum 3G atas operator-operator di Jepang (ada tiga operator: NTT Docomo, KDDI dan Vodafone). Sedangkan pemerintah Korea Selatan, walau pun mengenakan biaya di muka, memberikan insentif dan bantuan dalam pengembangan nirkabel pita lebar (Korea Selatan adalah negara yang menggunakan Cisco Gigabit Switch Router terbanyak di dunia) sebagai bagian dalam strategi pengembangan infrastruktur.
Di Eropa, dipelopori oleh British Telecom dan Telenor dengan teknologi W-CDMA pada Desember 2001. Di Amerika Serika jaringan 3G dipelopori oleh Monet Mobile Networks dengan teknologi CDMA20001xEV-DO, diikuti oleh Verizon Wireless pada tahun 2003. Di Australia jaringan 3G komersial pertama kali diperkenalkan oleh Hutchinson Telecommunication dengan nama Three pada bulan maret 2003. Pada bulan Desember 2007 jaringan 3G telah dioperasikan di 40 negara dan 154 jaringan HSDPA telah beroperasi di 71 negara, dan 200 juta pelanggan telah terhubung melalui jaringan 3G.
Perkembangan teknologi 3G mengharuskan pengaturan spektrum secara global, melalui penyediaan pita (band) yang lebih luas. Adanya teknologi 3G sebagai hasil pengembangan teknologi generasi kedua, yaitu hasil perkembangan evolusioner, yang masih menggunakan perangkat jaringan 2G yang diperluas dan hasil perkembangan revolusioner yang memerlukan jaringan dan alokasi frekuensi yang sama sekali baru. Secara evolusioner, IMT-2000 telah menerapkan dua macam evolusi ke 3G, yakni dari 2G CDMA standard IS-95 (cdmaOne) ke IMT-SC (cdma2000) dan dari 2G TDMA standars (GSM/IS-136) ke IMT-SC (EDGE). Secara revolusioner, IMT-2000 membangun alokasi spektrum yang baru terkait tuntutan saluran yang makin luas.
Salah Paham Akan 3G
Ada beberapa pemahaman yang salah tentang 3G dalam masyarakat umum:
1.Layanan 3G tidak bisa tanpa ada cakupan layanan 3G dari operator. Hanya membeli sebuah handset 3G, tidak berarti bahwa layanan 3G dapat dinikmati. Handset dapat secara otomatis pindah ke jaringan 3G bila, pelanggan tidak menerima cakupan 3G. Sehingga bila seseorang sedang bergerak dan menggunakan layanan video call, kemudian terpaksa berpindah ke jaringan 2G, maka layanan video call akan putus.
2.Layanan 3G berada pada frekuensi 1.900 Mhz. ITU-T memang mendefinisikan layanan 3G untuk GSM pada frekuensi 1.900 Mhz dengan lebar pita sebesar 60 Mhz. Namun, pada umumnya, teknologi berbasis CDMA2000 menggunakan spektrum di frekuensi 800 Mhz, atau yang biasa dikenal sebagai spektrum PCS (Personal Communication System).
Kelebihan dan kekurangan 3G
1.Kelebihan: Perkembangan teknologi pita lebar bergerak menguntungkan baik untuk dunia bisnis, pemerintahan maupun perorangan, karena semakin baru teknologinya semakin besar data yang dapat dikirimkan dalam waktu yang lebih singkat. Jenis data yang dapat dikirimkan juga menjadi lebih beragam, tidak hanya huruf dan angka, tetapi juga gambar diam, gambar bergerak, dan suara.
2.Kekurangan: Disamping harganya lebih mahal, perlu diperhatikan aspek keamanannya dan aspek etika di dalam penggunaan teknologi yang baru. Peran ITU sangat penting di sini.Penyedia jasa layanan pita lebar bergerak harus membangun jaringan baru yang memerlukan investasi yang sangat besar.
Generasi 3,5G
Generasi 3,5G merupakan pengembangan dari 3G yang memungkinkan pengiriman data lebih cepat. Perbandingan antara 3G dan 3,5G terlihat jelas pada kecepatan transmisinya. Pada 3G, kecepatan transmisi maksimal 384kbps, sementara pada 3,5G kecepatan transmisi maksimal mencapai 3,6Mbps. Generasi 3G dan 3,5G mendukung layanan video call yang memungkinkan penelpon dan penerima saling bertatap muka.
Generasi 4G
Belakangan ini industri nirkabel mulai mengembangkan teknologi 4G, meskipun sebenarnya teknologi 4G ini seperti Long Term Evolution (LTE) hanya merupakan evolusi dari teknologi 3GPP dan Ultra Mobile Broadband (UMB) berasal dari 3GPP2, sehingga sulit untuk membedakan dengan jelas teknologi 3G dan 4 G. Salah satu teknolgoi 4G yaitu WiMax mobile standard telah diterima oleh ITU untuk ditambahkan pada IMT-2000, sehingga teknologi baru ini masih digolongkan ke dalam keluarga 3G. International Telecommunication Union (ITU) sedang mempelajari kemampuan mobile broadband yang disebut IMT-advanced yang disebut teknologi generasi keempat (4G). Diharapkan ITU segera melaksanakan penggunaan IMT-2000 (3G) dan IMT-Advanced (4G), konsekuensinya ITU harus menambah pita baik dibawah 1 GHz maupun diatas 2GHz.
Referensi
Agusli, Rachmat. 2008. Panduan Koneksi Internet 3G & HSDPA di Handphone & Komputer. Jakarta: Mediakita.
Kadir, Abdul & Terra Ch, Triwahyuni. 2003. Pengenalan Teknologi Informasi. Yogyakarta: Penerbit Andi.
Turban E, Rainer Jr EK, Potter RE. 2006. Pengantar Teknologi Informasi Edisi 3. Jakarta: Penerbit Salemba Infotek.
Bahan Ajar Kuliah Jaringan Telepon oleh Ir. Prima Kristalina, MT. Politeknik Elektronika Negeri Surabaya (PENS) – Institut Teknologi Sepuluh Nopember Surabaya.
Netsh commands for Interface IP
Senen, Juni 7th, 2010|
You can run these commands from the Windows XP command prompt or from the command prompt for the Netsh Interface IP context. For these commands to work at the Windows XP command prompt, you must type netsh interface ip before typing commands and parameters as they appear in the syntax below. To run these Netsh commands on a remote Windows 2000 Server, you must first use Remote Desktop Connection to connect to a Windows 2000 Server that is running Terminal Server. There might be functional differences between Netsh context commands on Windows 2000 and Windows XP. For more information on Netsh, see Using Netsh To view the command syntax, click a command: set address Configures an IP address and a default gateway on a specified interface. Syntaxset address [name=]InterfaceName [source=]{dhcp | static [addr=]IPAddress [mask=]SubnetMask [gateway=]{none | DefaultGateway [[gwmetric=]GatewayMetric]}} Parameters[name =] InterfaceName : Required. Specifies the name of the interface for which you want to configure address and gateway information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [source=]{dhcp | static [addr=]IPAddress [mask=]SubnetMask [gateway=]{none | DefaultGateway [[gwmetric=]GatewayMetric]}} : Required. Specifies whether the IP address to configure originates from a Dynamic Host Configuration Protocol (DHCP) server or is static. If the address is static, IPAddress specifies the address to configure, and SubnetMask specifies the subnet mask for the IP address being configured. If the address is static, you must also specify whether you want to leave the current default gateway (if any) in place or configure one for the address. If you configure a default gateway, DefaultGateway specifies the IP address of the default gateway to be configured, and GatewayMetric specifies the metric for the default gateway to be configured. /?: Displays help at the command prompt. Remarks
add address Adds an IP address and a default gateway on a specified interface configured with a static IP address. Syntaxadd address [name=]InterfaceName [addr=]IPAddress [mask=]SubnetMask [[gateway=] DefaultGateway [gwmetric=]GatewayMetric] Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to add address and gateway information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [addr=]IPAddress [mask=]SubnetMask : Required. Specifies the IP address to add and the subnet mask for that IP address. [gateway=]DefaultGateway [gwmetric=]GatewayMetric : Specifies the IP address of the default gateway to add and the metric for that default gateway. /?: Displays help at the command prompt. delete address Deletes an IP address or a default gateway on a statically configured interface. Syntaxdelete address [name=]InterfaceName [addr=] IPAddress [[gateway=]{DefaultGateway | all}] Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to delete address and gateway information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [addr=]IPAddress : Required. Specifies the IP address to delete. [gateway=]{DefaultGateway | all} : Specifies whether to delete one default gateway or all default gateways. If only one default gateway should be deleted, DefaultGateway specifies the IP address of the default gateway to be deleted. /?: Displays help at the command prompt. Remarks
show address Displays information about static IP addresses and default gateways on a specified interface. Used without parameters, show address displays address information for all interfaces. Syntaxshow address [[name=]InterfaceName] Parameters[name=]InterfaceName : Specifies the name of the interface for which you want to display address information. The InterfaceName must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). /?: Displays help at the command prompt. Remarks
set dns Configures a DNS server address for a specified interface. Syntaxset dns [name=]InterfaceName [source=]{dhcp | static [addr=]{DNSAddress | none}} [[ddns=]{disabled | enabled}] [[suffix=]{interface | primary}] Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to set DNS information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [source=]{dhcp | static [addr =]{DNSAddress | none}} : Required. Specifies whether the IP address of the DNS server is configured by DHCP or is static. If the IP address is static, DNSAddress specifies the IP address of the DNS server to configure, and none specifies that the DNS configuration should be removed. [ddns=]{disabled | enabled} : Specifies whether the computer should attempt DNS dynamic update registration of the IP addresses of this connection and the full computer name. The full computer name is specified in the Control Panel item System on the Computer Name tab. The enabled parameter specifies that the attempt should occur. The disabled parameter specifies that the attempt should not occur. [suffix=]{interface | primary} : Specifies whether the computer should attempt DNS dynamic update to register the IP addresses and the connection-specific domain name of the specified connection in addition to the full computer name. The connection-specific DNS name of this connection is the concatenation of the computer name (which is the first label of the full computer name) and the DNS suffix of this connection. The interface parameter specifies that both the full computer name and connection-specific name should be registered. The primary parameter specifies that only the full computer name should be registered. /?: Displays help at the command prompt. Remarks
add dns Adds a DNS server to a list of DNS servers for a specified interface. Syntaxadd dns [name=]InterfaceName [addr=] DNSAddress [[index=]DNSIndex] Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to add DNS information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [addr= ]DNSAddress : Required. Specifies the IP address of the DNS server to add. [index=]DNSIndex : Specifies the position of the added DNS server in the list of DNS servers for the interface. /?: Displays help at the command prompt. Remarks
delete dns Deletes a DNS server or all DNS servers from a list of DNS servers for a specified interface or for all interfaces. Syntaxdelete dns [name=]InterfaceName [addr=]{DNSAddress | all} Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to delete DNS information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [addr=]{DNSAddress | all} : Required. Specifies whether to delete the address of one DNS server or all servers for all interfaces. If only one DNS server should be deleted, DNSAddress specifies the IP address of the DNS server to delete. /?: Displays help at the command prompt. show dns Displays the DNS configuration of a specified interface. Used without parameters, show dns displays the DNS configurations of all interfaces. Syntaxshow dns [[name=]InterfaceName] Parameters[name=]InterfaceName : Specifies the name of the interface whose DNS configuration you want to display. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). /?: Displays help at the command prompt. set wins Sets WINS server configuration to either DHCP or static mode for a specified interface. Syntaxset wins [name=]InterfaceName [source=]{dhcp | static [addr=]{WINSAddress | none }} Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to set WINS information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [source=]{dhcp | static [addr=]{WINSAddress | none }} : Required. Specifies whether the IP address of the WINS server to configure should be assigned by DHCP or is static. If the IP address is static, WINSAddress specifies the IP address of the WINS server to configure, and none specifies that the WINS configuration should be removed. /?: Displays help at the command prompt. Remarks
add wins Adds a WINS server to a list of WINS servers for a specified interface. Syntaxadd wins [name=]InterfaceName [addr=] WINSAddress [[index=]WINSIndex] Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to add WINS information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [addr=]WINSAddress : Required. Specifies the IP address of the WINS server to add. [index=]WINSIndex : Specifies the position of the added WINS server in the WINS server list for that interface. /?: Displays help at the command prompt. Remarks
delete wins Deletes a WINS server or servers from a list of WINS servers for a specified interface or all interfaces. Syntaxdelete wins [name=]InterfaceName [addr=]{WINSAddress | all} Parameters[name=]InterfaceName : Required. Specifies the name of the interface for which you want to delete a WINS server or servers. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). [addr=]{WINSAddress | all} : Required. Specifies whether to delete only one server for an interface or all servers for all interfaces. If only one server should be deleted, WINSAddress specifies the IP address of the WINS server to delete. /?: Displays help at the command prompt. show wins Displays the WINS configuration for a specified interface. Used without parameters, show wins displays the WINS configuration for all interfaces. Syntaxshow wins [[name=]InterfaceName] Parameters[name=]InterfaceName : Specifies the name of the interface whose WINS information you want to display. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). /?: Displays help at the command prompt. show icmp Displays ICMP statistics. Used without parameters, show icmp displays the statistics only once. Syntaxshow icmp [[rr=]RefreshRate] Parameters[rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. show interface Displays statistics for a specified interface. Used without parameters, show interface displays statistics for all interfaces only once. Syntaxshow interface [[index=]InterfaceIndex] [[rr=]RefreshRate] Parameters[index=]InterfaceIndex : Specifies the interface index, an integer that identifies the interface. [rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. Remarks
show ipaddress Displays information for a specified IP address. Used without parameters, show ipaddress displays information for all IP addresses on all interfaces once. Syntaxshow ipaddress [[index=]IPAddress] [[rr=]RefreshRate] Parameters[index=]IPAddress : Specifies an IP address of an interface. [rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. Remarks
show ipnet Displays the contents of the Address Resolution Protocol (ARP) cache, which contains the hardware addresses of resolved next-hop IP addresses. Used without parameters, show ipnet displays the information once. Syntaxshow ipnet [[rr=]RefreshRate] Parameters[rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. show ipstats Displays IP statistics. Used without parameters, show ipstats displays the statistics once. Syntaxshow ipstats [[rr=]RefreshRate] Parameters[rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. show joins Displays IP multicast groups that have been joined for the specified IP address. Used without parameters, show joins displays information for all IP addresses. Syntaxshow joins [[index=]IPAddress] Parameters[index=]IPAddress : Specifies an IP address of an interface. /?: Displays help at the command prompt. Remarks
show tcpconn Displays information on a specified TCP connection. Used without parameters, show tcpconn displays information for all TCP connections once. Syntaxshow tcpconn [[index=]{LocalIPAddress | LocalPort | RemoteIPAddress | RemotePort}] [[rr=]RefreshRate] Parameters[index=]{LocalIPAddress | LocalPort | RemoteIPAddress | RemotePort} : Specifies the connection about which to display information. The LocalIPAddress parameter specifies an IP address of an interface. The LocalPort parameter specifies a TCP port for a local process. The RemoteIPAddress parameter specifies an IP address of a remote host. The RemotePort parameter specifies a TCP port for a remote process. [rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the information). /?: Displays help at the command prompt. show tcpstats Displays TCP statistics. Used without parameters, show tcpstats displays the statistics once. Syntaxshow tcpstats [[rr=]RefreshRate] Parameters[rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. show udpconn Displays information about the UDP ports used for each IP address. Used without parameters, show udpconn displays UDP port information for all IP addresses once. Syntaxshow udpconn [[index=]{LocalIPAddress | LocalPort}] [[rr=]RefreshRate] Parameters[index=]{LocalIPAddress | LocalPort} : Specifies the connection about which to display information. The LocalIPAddress parameter specifies an IP address of an interface. The LocalPort parameter specifies a UDP port for a local process. [rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. show udpstats Displays UDP statistics. Used without parameters, show udpstats displays the statistics once. Syntaxshow udpstats [[rr=]RefreshRate] Parameters[rr=]RefreshRate : Specifies the refresh rate (the number of seconds between refreshing the display of the statistics). /?: Displays help at the command prompt. show config Displays IP address and other configuration information for a specified interface. Used without parameters, show config displays configuration information for all interfaces. Syntaxshow config [[name=]InterfaceName] Parameters[name=]InterfaceName : Specifies the name of the interface for which you want to display configuration information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). /?: Displays help at the command prompt. show offload Displays the tasks that can be performed by the network adapter for the specified interface corresponding to installed network hardware. Used without parameters, show offload displays offload information for all interfaces corresponding to installed network hardware. Syntaxshow offload [[name=]InterfaceName ] Parameters[name=]InterfaceName : Specifies the name of the interface for which you want to display offload information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). /?: Displays help at the command prompt. delete arpcache Removes the entries in the Address Resolution Protocol (ARP) cache for a specified interface. Used without parameters, delete arpcache removes the entries in the ARP caches of all interfaces. Syntaxdelete arpcache [[name=]InterfaceName] Parameters[name=]InterfaceName : Specifies the name of the interface for which you want to remove the ARP cache entries. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name"). /?: Displays help at the command prompt. dump Displays the current configuration as a series of Netsh Interface IP commands. Syntaxdump Parametersnone Remarks
Netsh Interface IP exampleThe following command configures the interface named Local Area Connection with the static IP address 10.0.5.99, the subnet mask of 255.255.255.0, and a default gateway of 10.0.5.1: set address name="Local Area Connection" source=static addr=10.0.5.99 mask=255.255.255.0 gateway=10.0.5.1 Formatting legend
|
Delphi
Kemis, Juni 3rd, 2010• Untuk menambah record / baris.
Table.append;
Table[...] := …;
Table.post;
• Untuk megedit data
Table.edit;
Table[...] := …;
Table.post;
• Untuk menghapus data.
Table.delete;
• Untuk pencarian
Table.findkey([]);
Table.findnearest([]);
Table.lookup(…,…,…);
Untuk lebih dalam mengenai bahasa delphi, silahkan lihat lihat ke http://delphi.about.com
China
Beijing
Indonesia
Jakarta
United States
Indianapolis
Ukraine
Lviv
